Product
Replacement kits for o-rings and seals. Available in many sizes and configurations.
A continuous extruded cord which can be used to fabricate custom o-rings where the standard sizes are not suitable. Available in metric and standard sizes, as well as in various shapes and configurations.
It is a doughnut-shaped seal typically used to prevent the passing of air or fluid In or Out of a defined area.
Irregular pieces of rubber to achieve the effect of sealing designed in accordance to customer specification.
It fills up the gap between two or more mating surfaces in order to prevent leakage from or into the attached materials even during compression.
Bonded seals are metal washers inserted with vulcanized rubber. They are used when sealing is unsuitable such as in of high pressure applications.
This seal is mainly used for oil seal housing, gear boxes and other parts. The rubber covered case provides an easy and effective push fit to blank off holes in engine cases and gear boxes.
It involves reciprocating movements of the hydraulic cylinder. The elastic ring does not distort and flip, high extrusion capacity for larger gaps and can be installed in closed grooves reducing processing costs.
With slow start up speeds or low sliding friction, it ensures superior performance even at low speed, performance of low-resistance seal and lubrication or no lubrication performance. Also, the installation of the ditch slot structure is simple.
Works with low sliding friction, wear resistant and can withstand higher operating pressure. It ensures excellent low-resistance sealing performance even at low speeds.
It assists in resisting extrusions, thus, preventing damage to the O-rings and seals from high pressure, high temperature and large extrusion gaps.
Its main function is to keep impurities dust, dirt as well as moisture from entering the fluid power system. Also, works in reciprocating motion.
It involves reciprocating movements of rod and piston preventing any fluid leakage.
It is designed so that the pressurized fluid does not leak between the piston and cylinder bore. It works in reciprocating action.
It is responsible for controlling the pressurized fluid from leaking out the system as the rod cycles back and forth. It works in reciprocating action.
Formed from wear resistant PTFE/Teflon it is suitable for low friction, high surface speeds, poor lubricated conditions and soft shafts.
Its main function is to keep impurities dust, dirt as well as moisture from entering the fluid power system. Also, works in reciprocating motion.
Allows for the reciprocating movements of rod and pistons while preventing any gas leakage.
It is designed so that the pressurized gas does not leak between the piston and cylinder bore. It works in reciprocating action.
It is responsible for controlling the pressurized gas from leaking out the system as the rod cycles back and forth. It works in reciprocating action.
Valve Stem Seals are responsible for regulating the proper amount of oil flow to the valve stem for sufficient lubrication. As a result, valve train durability is maximized and stem wear is reduced.
This seal can be either simple or complex. The former is usually used in shock absorbers filled with oil. The latter has two main lip design, reciprocating actuator to maintain internal pressure, which produces a spring-like effect.
It functions to ensure that the gas within the system is unable to escape. The reciprocating actuator reduces start-up friction as well as lifting the pressure bar smoothly.
It is designed to prevent the hydraulic fluid from leakage to ensure smooth and normal operation of the hydraulic power steering system. It is either designed as reciprocating or rotating.
Axle Seals for Agricultural and Construction Machinery with their polyurethane wiper and oil seal lips, protect internals from water, dust and mud.
It is recommended for heavy dirt exclusion applications. Will protect from mud, weeds and other pollutants, hence, ideal for agricultural machinery, as well as construction vehicles. The shaft sleeve design protects the oil seal lip from scratches.
The main purpose of these seals is to ensure oil absorption on the oil seal’s lip to maintain lubrication.
AC Compressor Seals are distinct seals that can be found in air conditioning systems of cars, trucks and other motor vehicles. It must seal and hold the refrigerant vapor from leaking between the rotating shaft of the compressor and the front end. In addition, it protects the oil seal and shaft from rust formation.
Its “labyrinth” design is engineered to ensure excellent sealing capability. Its functions include preventing pollutants from entering any critical parts of the internals, maintain ideal temperature, minimizing wear of the rubber, and prolonging the service life of axle and hub.
Its primary function is to retain bearing lubricant. Oil seal lips rotating actuator prevents oil leakage. Leakage which would affect the performance of the bearings and other components.
It is installed directly onto axial shaft seals. V Type Seals protect bearings and other parts from contamination of foreign materials as well as to prevent grease leakage.
It is mainly used to protect bearing and other vital parts of the machine from impurities. It is usually made of metal and works either on a stationary or rotating motion.